The SFP10GSRST Cisco® Compatible 10GBase-SR SFP+ Fiber Transceiver Module 850nm MM LC w/DDM - 300m (984ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a 10Gb SFP+ Multimode LC port on your fiber networking equipment or fiber media converter.
Supporting data rates up to 11.1 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP+/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant 10GbE SFP+ port. Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot.
This 850nm multi-mode SFP+ module is compatible with the Cisco SFP-10G-SR transceiver.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
The StarTech.com Advantage
- Cost-effective replacement for MSA or Cisco compliant equipment
- Extend network connectivity up to 300m
Cable type |
Multi-mode |
Data transfer rate (max) |
11300 Mbit/s |
Depth |
60 mm |
Fiber optic connector |
LC |
Height |
10 mm |
Hot-Plug support |
Yes |
Interface type |
SFP+ |
Maximum transfer distance |
300 m |
Networking standards |
IEEE 802.3ae |
Operating relative humidity range |
30 - 70 % |
Operating temperature range (T-T) |
0 - 70 °C |
Source data-sheet |
Icecat.biz |
Storage temperature range (T-T) |
-40 - 85 °C |
Wavelength |
850 nm |
Weight |
18 g |
Width |
12 mm |
Specific References
- EAN13
- 0065030850797