- Complies with IEEE 802.3ab and IEEE 802.3z
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 15km
The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’ system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers.
Cabling technology |
UTP 5e, 5 |
Certification |
FCC, CE |
Compliance industry standards |
IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x |
Connectivity technology |
Wired |
Dimensions (WxDxH) |
94.5 x 73 x 27 mm |
Full duplex |
Yes |
I/O ports |
1x 1000M SC
1x 1000M RJ45 |
LED indicators |
Link |
Maximum transfer distance |
15000 m |
Operating relative humidity (H-H) |
10 - 90 % |
Operating relative humidity range |
10 - 90 % |
Operating temperature (T-T) |
0 - 40 °C |
Operating temperature range (T-T) |
0 - 40 °C |
Source data-sheet |
Icecat.biz |
Storage relative humidity (H-H) |
5 - 90 % |
Storage relative humidity range |
5 - 90 % |
Storage temperature (T-T) |
-40 - 70 °C |
Storage temperature range (T-T) |
-40 - 70 °C |
Wavelength |
1310 nm |
Specific References
- EAN13
- 6935364030445