- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 2km
The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.
Cabling technology |
UTP 3, 4, 5e, 5 |
Certification |
FCC, CE |
Compliance industry standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Connectivity technology |
Wired |
Dimensions (WxDxH) |
94.5 x 73 x 27 mm |
Full duplex |
Yes |
I/O ports |
1x 100M SC
1x 100M RJ45 |
LED indicators |
PWR, FDX/Col, Link/Act, SPD |
Maximum transfer distance |
2000 m |
Operating relative humidity (H-H) |
10 - 90 % |
Operating relative humidity range |
10 - 90 % |
Operating temperature (T-T) |
0 - 40 °C |
Operating temperature range (T-T) |
0 - 40 °C |
Source data-sheet |
Icecat.biz |
Storage relative humidity (H-H) |
5 - 90 % |
Storage relative humidity range |
5 - 90 % |
Storage temperature (T-T) |
-40 - 70 °C |
Storage temperature range (T-T) |
-40 - 70 °C |
Wavelength |
1310 nm |
Specific References
- EAN13
- 6935364030391