Cisco® Catalyst® 2960 Series Switches with LAN Lite software are fixed-configuration, standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring closet and small branch-office networks. These switches simplify the migration from nonintelligent hubs and unmanaged switches to a fully scalable managed network. The LAN Lite Cisco IOS® Software provides entry-level security, quality of service (QoS), and availability capabilities while lowering the network total cost of ownership.
The Cisco Catalyst 2960 LAN Lite Switches offer:
-Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper or a fiber uplink; each dual-purpose uplink port has one 10/100/1000 Ethernet port and one Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time.
-Scalable and secure network management.
-Baseline Network Admission Control based on users, ports, and MAC addresses.
-Easy network configuration, Cisco IOS Software updates, and troubleshooting using Cisco Network Assistant software.
-QoS for traffic classification and shaping to prioritize various applications.
-Single IP address, syslog, and Simple Network Management Protocol (SNMP) management for a stack of up to 16 switches.
-Autoconfiguration using Smartports.
-Enhanced troubleshooting for link connectivity problems and cable diagnostics.
-QoS and support for multicast services.
-Software updates at no additional cost.
| 10G support | No |
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 100 - 240 V |
| Auto MDI/MDI-X | Y |
| Basic switching RJ-45 Ethernet ports quantity | 50 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Connectivity LEDs | Н |
| Depth | 330.2 mm |
| Electromagnetic compatibility | FCC, EN 55022, EN 55024, AS/NZS CISPR22, CE, CNS13438, MIC, GOST |
| Flash memory | 32 MB |
| Form factor | 1U |
| Full duplex | Y |
| Gigabit Ethernet (copper) ports quantity | 2 |
| Height | 44 mm |
| Input current | 0.8 - 1.3 A |
| Internal memory | 64 MB |
| LED indicators | Y |
| MAC address filtering | Y |
| MAC address table | 8000 entries |
| Management protocols | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
| Mean time between failures (MTBF) | 339743 h |
| Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| Noise level | 40 dB |
| Non-operating altitude | 0 - 4000 m |
| Number of VLANs | 255 |
| Operating altitude | 0 - 3000 m |
| Operating relative humidity (H-H) | 10 - 85 % |
| Operating temperature (T-T) | -5 - 45 °C |
| Power consumption (typical) | 71 W |
| Power over Ethernet (PoE) | No |
| Quality of Service (QoS) support | Y |
| Rack mounting | Yes |
| Redundant power supply (RPS) support | Y |
| Safety | UL 60950-1, CUL - CAN/CSA 22.2 No. 60950-1, TUV/GS - EN 60950-1, CB - IEC 60950-1, CE Marking, NOM |
| Security algorithms | 802.1x RADIUS,SSH-2 |
| Spanning tree protocol | Y |
| Storage relative humidity (H-H) | 10 - 85 % |
| Storage temperature (T-T) | -25 - 70 °C |
| Switch layer | L2 |
| Switch type | Managed |
| Throughput | 10.1 Mpps |
| Weight | 3600 g |
| Width | 450 mm |
Cisco WS-C2960-48TT-S
48 Ethernet 10/100 ports and 2x1000 BT, 48 PoE Ports, 1 RU fixed-configuration, 100 to 240 VAC, 48 dB, LAN Lite Entry Layer 2 RF
£611.83
Tax included
Similar products
48 Ethernet 10/100 ports and 2x1000 BT, 48 PoE Ports, 1 RU fixed-configuration, 100 to 240 VAC, 48 dB, LAN Lite Entry Layer 2 RF