Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features.
| 10G support | Yes |
| AC input frequency | 50/60 Hz |
| AC input voltage | 120 - 230 V |
| Auto MDI/MDI-X | Y |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Built-in processor | Y |
| Cable types supported | Cat5e |
| Copper ethernet cabling technology | 10BASE-T,100BASE-T,1000BASE-T |
| Depth | 457.2 mm |
| Flash memory | 128 MB |
| Form factor | 1U |
| Full duplex | Y |
| Height | 25.4 mm |
| Internal memory | 512 MB |
| LED indicators | Y |
| Management protocols | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1 |
| Manual | Y |
| Mean time between failures (MTBF) | 233370 h |
| Memory type | DRAM |
| Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| Noise level | 57 dB |
| Non-operating altitude | 0 - 4000 m |
| Number of power supply units | 1 |
| Number of VLANs | 1023 |
| Operating altitude | 0 - 3000 m |
| Operating relative humidity (H-H) | 10 - 95 % |
| Operating temperature (T-T) | -5 - 40 °C |
| Power consumption (typical) | 66 W |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) ports quantity | 48 |
| Processor model | AppliedMicro APM8639 |
| Quality of Service (QoS) support | Y |
| Rack mounting | Yes |
| Redundant power supply (RPS) support | Y |
| Routing protocols | HSRP,IP,RIP-1,RIP-2,RIPng |
| Spanning tree protocol | Y |
| Stackable | Yes |
| Storage relative humidity (H-H) | 10 - 95 % |
| Storage temperature (T-T) | -25 - 70 °C |
| Switch layer | L2 |
| Switch type | Managed |
| Switching capacity | 216 Gbit/s |
| Switching protocols | RIP-1, RIP-2, HSRP, static IP routing, RIPng |
| USB 2.0 ports quantity | 2 |
| User guide | Y |
| Web-based management | Y |
| Width | 432.8 mm |
Specific References
- EAN13
- 0882658712739
Cisco C2960X48FPDL, Refurbished
Catalyst 2960-X, 48 x 10/100/1000 Ethernet, 2 x SFP+, APM86392 600MHz dual core, DRAM 512MB, Flash 128MB, PoE 740W, LAN Base, Refurbished
£5,273.88
Tax included
Similar products
Catalyst 2960-X, 48 x 10/100/1000 Ethernet, 2 x SFP+, APM86392 600MHz dual core, DRAM 512MB, Flash 128MB, PoE 740W, LAN Base, Refurbished