Exclude

The 4Gb Fibre Channel Pass-Thru Module for HP c-Class BladeSystem is designed for those customers desiring to connect server blades directly to external Fibre Channel SAN switches or directors instead of HP Fibre Channel Virtual Connect or BladeSystem SAN switches. Note that servers must always connect to a SAN and never directly to a storage...

The HP NC360m is a HP BladeSystem c-Class network adapter providing two Gigabit Ethernet ports on a single mezzanine card. With the addition of the NC360m, HP BladeSystem c-Class customers now have the choice of an HP network adapter that uses either an Intel or Broadcom controller. The NC360m is designed for applications requiring additional...

The HP NC364m is a HP BladeSystem c-Class network adapter providing four Gigabit Ethernet ports on a single card saving valuable server mezzanine slots for other purposes. The x4 PCI Express NC364m is supported on Integrity and ProLiant c-Class server blades in all mezzanine slots. For Integrity c-Class servers, it is the first network adapter...

The QMH2562 is a PCI Express based 8Gb Fibre Channel mezzanine card for the HP c-Class BladeSystem that delivers twice the data throughput as the previous generation 4Gb mezzanine card. It is optimized for virtualization, low power usage, management, security, reliability, availability and serviceability. While providing leading edge 8Gb...

The NC532m is a multifunction 10 Gigabit Ethernet network adapter for the ProLiant c-Class BladeSystem. The adapter is a dual port 10GbE mezzanine, that when paired with the new 10Gb Virtual Connect Module provides up to eight physical function NICs that can be configured to operate at any speed from 100Mbs to 10Gbs. The NC532m works as a...

HP supports InfiniBand products that include mezzanine Host Channel Adapters (HCA) for c-Class server blades, switch blades for c-Class enclosures, rack switches and cables for building scale-out solutions.Features- High performance interconnect- High bandwidth with up to 40Gbps per port- Low latency: as low as 1.2 microseconds for MPI...

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used.To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and...

The HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem offers enhanced virtual connect capabilities, allowing up to 128 virtual machines running on the same physical server to access separate storage resources. Provisioned storage resource is associated directly to a specific virtual machine—even if the virtual server is...

The HP NC552m 10Gb 2-Port Flex-10 Ethernet Adapter is a new member of the c-Class 10Gbe adapter portfolio. The HP NC552m is a Flex-10 designed Ethernet Adapter based on the Blade Engines 3 controller that delivers superior throughput compared to all adapters in the 10GbE portfolio. Right for virtualized environments, the adapter works with all...

The HP NC553m 10Gb 2-port FlexFabric Adapter (NC553m FlexFabric Adapter) delivers the performance benefits and cost savings of converged network connectivity for HP BladeSystem servers. The dual-port NC553m optimizes network and storage traffic with hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE), and Fibre...