Better 10G Ethernet Connectivity for Enterprise Deployments
D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.
10G Ethernet speeds
The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.
Enhanced Small Form-factor Pluggable Format
The transceivers use the Enhanced Small Form-factor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable.
Hot-Pluggable
All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This allows modules to be added or removed without interrupting the network.
D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.
10G Ethernet speeds
The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.
Enhanced Small Form-factor Pluggable Format
The transceivers use the Enhanced Small Form-factor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable.
Hot-Pluggable
All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This allows modules to be added or removed without interrupting the network.
| Certification | CE, FCC, VCCI, UL, TUV, CDRH |
| Depth | 56.5 mm |
| Fiber ethernet cabling technology | 10GBase |
| Fiber optic connector | LC |
| Height | 11.85 mm |
| Hot-Plug support | Y |
| Input voltage | 3.3 V |
| Interface type | SFP+ |
| Maximum current | 0.3 A |
| Maximum data transfer rate | 10000 Mbit/s |
| Maximum transfer distance | 10000 m |
| Mean time between failures (MTBF) | 4650000 h |
| Networking standards | IEEE 802.3ae |
| Operating relative humidity (H-H) | 5 - 85 % |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Storage temperature (T-T) | -40 - 85 °C |
| Wavelength | 1310 nm |
| Weight | 19.5 g |
| Width | 14.8 mm |
| Fiber cable diameters supported (core/cladding) | 9/125 µm |
| Sustainability compliance | Y |
| Compliance certificates | RoHS |
D-Link DEM-432XT
10GBASE-LR SFP+ Transceiver (10 km), Pack of 10
£1,269.43
Tax included
Similar products
10GBASE-LR SFP+ Transceiver (10 km), Pack of 10